Software Upgrades

• Navigation

Software Upgrades

Software Upgrades

BaseStation 3000

The current release software for the BaseStation 3000 and 3000R systems is 8.8.9.12. You can see the version of sofware you are running from the AUX dial position on your 3000 controller.

Click here to download the latest 3000 software.
For instructions on how to upgrade the software on your 3000 controller, click here. To download the Product Manual Click here.

You will also need access to a computer with a built in SD card reader or a USB SD Card Reader in order to complete the upgrade. USB SD Card readers are available through most computer retail stores

BaseStation 3000+/3200

The current release software for the BaseStation 3200 and 3000+ systems is 8.8.9.12. You can see the version of sofware you are running from the AUX dial position on your 3000+/3200 controller.

Click here to download the latest 3000+/3200 software.

You will need access to a computer with a USB port and a USB drive in order to complete the upgrade.

Upgrade Instructions:

Extract the "Upgrade" folder from the downloaded zip file and place it at the root level of your USB drive. Once this is finished, remove the USB drive and connect it to your 3000+/3200's USB port.
Turn the dial to AUX, open the System menu, press "PREV" to highlight the empty, unlabeled box so it shows red, and press the "—" key twice. The box should now display * UPDATE * and still be red. There should be two columns of dates displayed to the left, some not matching. If this does NOT show, the Update folder was incorrectly copied to the USB drive. Reconnect it to the PC and confirm the folder was copied correctly.
Press enter and the update process should begin, indicated by the "BUSY.." text in the upper left. Once completed the "BUSY..." text will disappear and the two columns of dates should match, as indicated by "=" symbols.
Now to reset the controller and run the updated software, turn the dial to OFF, then press and hold the "+", "—" and "ENTR" buttons until the screen goes blank. Once the controller is finished restarting, turn the dial to AUX to confirm the version number is correct and that update was successful.

BaseManager Update

Click Here to visit the BaseManager Update site