Baseline Irrigation Solutions
Filter by:
 
BaseManager - Assigning Zones and other devices
See how easy it is to assign devices using BaseManager
BaseManager -- Adding a New Program
Learn how to add an irrigation program using BaseManager
BaseManager -- Performing Manual Operations
Learn how to manually start and stop zones or programs in BaseManager
BaseManager -- Selecting a Controller
A quick tutorial on how to select a controller in BaseManager
BaseManager -- Setting Up a Map
Learn how to geo-locate device on a map in BaseManager
BaseManager -- Testing Devices
Learn how to test a zone, moisture sensor, or any other device in BaseManager
BaseStation 1000 -- Configuring Concurrent Zones
This video describes how to configure the BaseStation 1000 smart irrigation controller to run multiple zones at one time.  The video shows how to configure the settings for an individual program and for the controller as a whole.
BaseStation 1000 -- Enabling or Disabling a Program
This video describes how to enable or disable programs in the BaseStation 1000 smart irrigation controller. This feature allows you to set up a program for a special use, and then disable it later when you no longer want it to run.
BaseStation 1000 -- Searching for and Assigning Devices

This video shows how to search for an assign zones and other devices in a BaseStation 1000 smart irrigation controller by Baseline.

BaseStation 1000 -- Setting a Seasonal Adjustment for a Program

This video describes how to set up a seasonal adjustment for a program on the BaseStation 1000 smart irrigation controller. If your area is experiencing a period of unseasonably dry or wet weather, you can use the seasonal adjustment factor to increase or decrease the amount of water that a program is applying without having to change the runtimes for individual zones.

BaseStation 1000 -- Setting the Date & Time

This video describes how to set up the date and time on the BaseStation 1000 smart irrigation controller. It describes the steps for setting the time and configuring the time format.

BaseStation 1000 -- Testing Devices and the Two-Wire

This video for the BaseStation 1000 smart irrigation controller describes how to test a zone, a soil moisture sensor, the two-wire, and all devices on the two-wire and it describes the results of each test. The video demonstrates how to find the messages related to errors.

BaseStation 3200 -- Assigning Zones

This video for Baseline’s BaseStation 3200 irrigation controller shows how to assign biCoders (decoders) to zones.

BaseStation 3200 -- Configuring Zones

This video for Baseline’s BaseStation 3200 irrigation controller shows how to configure the various settings for zones including assigning a zone to a program, setting the run time, configuring a primary zone, and linking zones. Be sure you have performed the assigning zones procedure first.

BaseStation 3200 -- Learning Flow
This video for Baseline’s BaseStation 3200 irrigation controller shows how to learn flow for an individual zone or for all the zones in a program.
BaseStation 3200 -- Setting Up Mainlines
This video for Baseline’s BaseStation 3200 irrigation controller shows how to set up your mainlines including how to assign POCs to mainlines and how to assign mainlines to programs. Before going through this video, you should watch the video for setting up points of connection.
BaseStation 3200 -- Setting Up Points of Connection

This video for Baseline’s BaseStation 3200 irrigation controller shows how to configure your points of connection or water sources. The video shows various scenarios with mainlines, master valves, pumps, and flow meters and explains how to configure these devices.

BaseStation 3200 -- Setting Up Programs
This video for Baseline’s BaseStation 3200 irrigation controller shows how to set up programs after you have assigned your biCoders to zones and configured your zone settings. The video shows how to set up start times, start days, water windows, concurrent zone settings, and explains the advanced features for a program.
BaseStation 3200 -- Setting Up Soil Moisture Sensors

This video for Baseline’s BaseStation 3200 irrigation controller shows how to set up moisture sensor based watering with the upper and lower threshold watering strategies.

BaseStation 3200 -- Setting Up Start, Stop, Pause Conditions
This video for Baseline’s BaseStation 3200 irrigation controller shows how to set up a start, stop, or pause condition for a program. The video shows how to configure these conditions for event decoders, soil moisture sensors, and air temperature sensors.
BaseStation 6000 -- Configuring a Remote Base Unit (Serial Connection)
How to set up a Remote Base Unit on a BaseStation 6000.  This video covers RBUs that use a Serial Connection to communicate with the field.  (BL-6111-SR or a BL-6111-WB via a BL-6100C-SR2WB Bridge Unit.
BaseStation 6000 -- Configuring a Zone
Help on configuring a new zone into the BaseStation 6000 Software.
WeatherAccess™ -- Configuring Zone Properties
This short video shows how to configure the zone properties in BaseManager for weather-based watering.
WeatherAccess™ -- Connecting a Weather Station to BaseManager
This short video shows how to connect a weather station from Weather Underground's network to Baseline's BaseManager so you can use weather data to manage irrigation.
WeatherAccess™ -- Enabling Weather-Based Watering on a BaseStation 1000
This short video shows how to enable weather-based watering on a BaseStation 1000 irrigation controller through Baseline's BaseManager system
WeatherAccess™ -- Enabling Weather-Based Watering on a BaseStation 3200
This short video shows how to enable weather-based watering on a BaseStation 3200 irrigation controller through Baseline's BaseManager system
WaterTec S100 -- How to Calibrate the Sensor
This video produced by Baseline's distribution partner, Ewing Irrigation, shows how to calibrate the Baseline WaterTec S100 soil moisture sensor.
WaterTec S100 -- How to Install
This video, produced by Baseline's distribution partner, Ewing Irrigation, shows how to install the Baseline WaterTec S100 soil moisture sensor and how to connect the S100 control unit to your irrigation timer.
BaseStation 1000 -- Overview of the Menu Options

This video walks through the menus that are available on the BaseStation 1000 smart irrigation controller. It describes the options under each of the main menus and how to navigate through the menus and select the options that you want to use.

BaseStation 1000 Overview
Information about the BaseStation 1000, including information on specifying and ordering.
BaseStation 3200 Overview
Product information about Baseline's BaseStation 3200 irrigation controller, including ordering and specifying information.
LiveView
A short video demonstrating Baseline's revolutionary LiveView with a BaseStation 1000.
Preview of the BaseStation 1000
A quick overview of the New BaseStation 1000 Controller